Click for regional version
USA BodPave 85

BODPAVE® 85 Porous Grass Pavers / Paving Grid

TERRAM® BODPAVE 85 grass pavers / paving grids are a strong interlocking 100% recycled cellular porous plastic paving
grid system for grass reinforcement, ground stabilisation & gravel retention for regular trafficked surfaces (pedestrian and vehicles).

BODPAVE 85 porous pavers can be installed with either a grass or gravel filled surface. BODPAVE 85 permeable pavers are manufactured in the UK in black, green or natural UV Stabilised 100% recycled HDPE and are strong, chemically inert & non-toxic.

BODPAVE 85 porous paving provide a durable, safe and eco-friendly surface for trafficked areas.


  • Car Parks / Coach Parks (Grass or Gravel)
  • Overspill / overflow grass car parks
  • Emergency Service (Fire Access routes)
  • HGV service access routes
  • Aircraft taxiways & helipads
  • Walkways and disabled access routes (DDA)
  • Golf buggy paths
  • Driveways and residential lawn parking
  • SUDS source control

BODPAVE 85 is a cost effective solution to worn & rutted grassed areas, displaced gravel and for source control of surface water run-off.


  • BODPAVE 85 grass and ground pavers have a load bearing capacity up to 400t/m²
  • Supplied as 4 pavers (1m²) pre-connected for rapid ease of installation
  • Manufactured from 100% recycled polymer
  • Manufactured in the UK - unlike the majority of grass pavers / ground pavers
  • Pavers filled with grass or gravel are SUDS source control compliant
  • BODPAVE 85 grass pavers / gravel pavers allow a naturally pleasing, environmentally friendly & free draining grass or gravel surface
  • Available in black, green or natural colour (for discreet gravel surfaces)
  • Pavers can be offset in 1 cell increments to fir around obstacles, whilst retaining a positive interlock to adjacent pavers
  • Open cell wall & surface structure enabling unrestricted grass root, stolon and rhizomes development
BodPave 85 paving grid structure BodPave85 filled with Grass or gravel
Grid Structure - 500mm x 500mm grids
Reinforcement pavers can be filled with grass or gravel


The unique design of BODPAVE 85 resists lateral movement, improves traction and allows expansion & contraction whilst promoting optimum grass growth, root protection and surface stabilisation. The open cell structure provides high surface water infiltration and is suitable for source control within a SUDS profile.

Open cell structure promotes optimum grass growth
Integral ground spikes resist deformation & lateral movement
Integral interlocking 'snap-fit' connections
Castellations aid lateral grass growth and increase traction
Cells contain water retention cups to optimise root growth
Pavers can be offset by 1 cell increments for curves / obstructions


BODPAVE 85 permeable paving grids should be installed onto a well prepared, free draining, firm and relatively level sub-base (typically a DoT (GSB Type or reduced fines Type 3) using either the TERRAM BODPAVE 85 'reduced-dig system' or by employing a full sub-base construction incorporating a Tensar TriAx™ TX160 geogrid reinforcement layer. The ground reinforcement porous paving grids simply connect together and are filled with either a sand:soil rootzone and seeded for a grass surface, or filled with an angular aggregate for a gravel surface as determined by the application. Construction profiles for each application will be determined by specific site conditions & loading criteria. Detailed design literature and technical support are available to download on the left of this page. Please note that for all BODPAVE 85 grass paver / gravel paver installations, we strongly recommend that all areas should have sufficient drainage prior to the installation. Failure to ensure this may result in the product not performing as intended.

Grass Paver for a grass surface car park Gravel paving grid Gravel retained in paving grid
BODPAVE 85 allows optimum grass growth
BODPAVE 85 retains gravel for a free draining stabilised surface
BODPAVE 85 is ideal as a gravel driveway or access road


Product Details

Part No.
BODPAVE 85 85 Porous Paver
(4 Pack of grids)
100% Recycled PE
Add to Cart
BODPAVE 85 Porous Paver 059447 Green (4 Pack of grids) 100% Recycled PE Add to Cart
BODPAVE 85 Paver Natural 059430 Natural (4 Pack of grids) Virgin PE Add to Cart

Car Park Bay Marker

Our Bay marker has been manufactured to snap-fit into the BODPAVE 85 paving grid. The bay marker can be used to produce parking bay lines, L-shapes, T-Shapes and Squares, T Junctions and access road centre lines. The marker can be easily cut to produce a small square which can assist in producing letters, words and arrows.

BodPave Bay Marker Bay marker can be cut to small sqaures to make many shapes L Shapes can be made BodPave 85 bay marker produces a T Shape


Part No.
215mm x 70mm
Add to Cart


Grassed surfaces : Grass car parks, overflow grass car parks, grass paths, residential lawn parking, grass access routes with a full construction profile

Gravel surfaces : Gravel driveways, grave car parks, gravel coach parks, access roads, caravan standings with a full construction profile

'Reduced Dig' : Where firm or reinforced ground already exists and where lighter applications may be required for both grass and gravel surfaces For confirmation of the correct construction profile required please contact our office on 01621 874200 to speak with one of our technical team.

Typical Construction Profile

BodPave85 Typical Design profile

The typical design profile includes reference to a Tensar TriAx TX160 geogrid and a TERRAM geotextile which are both available from Boddingtons.

The information on this page is of an illustrative nature and is supplied without charge. It does not form part of any contract with the user. Final determination of the suitability of any information or material for the use contemplated and the manner of the use is the sole responsibility of the user and the user must assume all risk and liability in connection therewith.

Other products that maybe of interest for reinforcing grass surfaces include TURFPROTECTA Turf Reinforcement Mesh for the general reinforcement of occasional use grassed surfaces, GRASSPROTECTA Grass Protection Mesh for reinforcing existing grassed surfaces used for car parks and access ways and BODPAVE 85 ground stabilisation grids for gravel and driveway reinforcement.

For further information, please visit our Grass Reinforcement Solutions website.